Download PDFOpen PDF in browser

A Framework for Optimizing Process Parameters in Direct Metal Laser Sintering (DMLS) using Artificial Neural Network (ANN)

EasyChair Preprint 899, version 2

Versions: 12history
11 pagesDate: April 18, 2019

Abstract

Powder bed fusion (PBF) process is a metal additive manufacturing process, which can build parts with any complexity from a wide range of metallic materials. Research in the PBF process predominantly focuses on the impact of few parameters on the ultimate properties of the printed part. The lack of a systematic approach to optimizing the process parameters for a better performance of given material results in a sub-optimal process. This process needs a comprehensive study of all the influential parameters and their impact on the mechanical and microstructural properties of a fabricated part. Furthermore, there is a need to develop a quantitative system for mapping the material properties and process parameters with the ultimate quality of the fabricated part to achieve improvement in the manufacturing cycle as well as the quality of the final part produced by the PBF process. To address the aforementioned challenges, this research proposes a framework to optimize the process for 316L stainless steel material. This framework characterizes the influence of process parameters on the microstructure and mechanical properties of the fabricated part using a series of experiments. These experiments study the significance of process parameters and their variance as well as study the microstructure and mechanical properties of fabricated parts by conducting tensile, impact, hardness, surface roughness, and densification tests, and ultimately obtain the optimum range of parameters. This would result in a more complete understanding of the correlation between process parameters and part quality. Furthermore, these experiments provide the required data needed to develop an Artificial Neural Network (ANN) model to optimize process parameters (for achieving the desired properties) and estimate fabrication time.

Keyphrases: Additive Manufacturing, Artificial Neural Network (ANN), DMLS, Selective Laser Sintering, laser sintering, optimization framework, parameter optimization, powder bed fusion, sensitivity analysis, ultimate quality

BibTeX entry
BibTeX does not have the right entry for preprints. This is a hack for producing the correct reference:
@booklet{EasyChair:899,
  author    = {Mallikharjun Marrey and Ehsan Malekipour and Hazim El-Mounayri and Eric J Faierson},
  title     = {A Framework for Optimizing Process Parameters in Direct Metal Laser Sintering (DMLS) using Artificial Neural Network (ANN)},
  howpublished = {EasyChair Preprint 899},
  year      = {EasyChair, 2019}}
Download PDFOpen PDF in browser